24in Aluminum Grading Rake

• 24" Aluminum Head 
• Rounded Teeth For Non-Gouging 
• 66" Powder-Coated Handle 
• Reinforced Head 

The 24in Aluminum Grading Rake is built for smoothing soil and dialing in a clean finish without beating up turf. The 24-inch wide aluminum head moves a lot of material per pass, and the smooth rounded teeth are shaped to rake across lawns and topdressing without digging trenches. Flip it over and the tapered flat edge on the back of the head works like a quick leveling bar for finish grading and blending low spots. If you are tired of flimsy rakes twisting under load, especially when you’re spreading soil, compost, or sand, this is the rake for you.

A.M. Leonard’s premium build includes double head runners that reinforce the rake head, an aluminum head-to-handle plug to keep the connection tight, and thick wrap-around braces to help take stress off the joint during aggressive pulls. The 66-inch powder-coated handle stays comfortable with a 6-inch vinyl non-slip grip. Plus, galvanized hardware with Nylock nuts helps keep everything snug over time. Expect an additional handling fee at checkout due to the package dimensions.

Product Specs

• Head width: 24 inches
• Handle length: 66 inches
• Teeth length: 2-1/4 inches
• Grip: 6-inch non-slip handle section

Product Tips

• Use short, overlapping passes when leveling so you don’t create ripples in the finish grade.
• For topdressing turf, keep the teeth shallow and let the rounded tips glide rather than dig.
• Flip to the flat edge to feather material into existing grade around sidewalks and drive edges.
• Rinse off grit after use; it keeps the teeth and hardware cleaner and the rake feeling smoother.
• Check hardware periodically after the first few uses; Nylock nuts hold well, but early settling is normal.

FAQs

Is this a lawn rake or a grading rake?

It’s a hybrid that works well for both. The rounded teeth are lawn-friendly, and the flat back edge is made for leveling and finish grading.

What is the flat edge on the back used for?

It’s for smoothing and leveling soil or topdressing, especially when you want a cleaner final surface without tooth marks.

How to use the 24in Aluminum Grading Rake?

Use the rounded teeth to pull and spread soil, compost, or sand in thin layers, keeping the teeth just deep enough to move material. Once the surface is close, flip the rake and drag the flat edge to level and blend the finish grade. Make a final light pass with the teeth if you need to break up small ridges.

Will it gouge turf when topdressing?

The rounded teeth are designed for non-gouging action, so it’s well suited to lawn and turf work when used with a light touch.

What warranty does it include?

It’s backed by A.M. Leonard’s lifetime warranty program.

SKU:

123AG246-AML